Wood Floor Resurfacing San Diego

This project started from the tenant in this home who was searching for Wood Floor Surfacing San Diego because her son had dropped a water balloon on the wood floor and it expanded. We were able to replace those boards and repair the area before they had to move. Fortunately for us, she left our number with the home owner who lives in Arizona. 

They were pretty hard on all the rooms and also while they were moving out the floor was severely scratched so Bill asked if we could take care of it and make it like new again. 

Some areas also had discoloration due to large area rugs being placed to protect the flooring. This can lead to a very pronounced line when moved. This is normal and can be corrected with a high quality Wood Floor Surfacing machine. 

This is typically only caused by the sun much like a sun tan and we are able to take off the very top layer using a very high quality drum sander revealing the original color of the natural wood flooring. We use these small edgers for around the edges and on this particular home, we had to hand sand up to the existing travertine in which they used for the base board trim molding. 

We then apply 2 to 4 coats of new finish to bring the natural color of the wood back to life and give the floor a new protective layer. 

We use an environmentally safe system which uses both high power vacuums and cyclonic hepa filtration to evacuate 99% of toxic airborne dust that is generated by sanding. The dust is evacuated away by vacuum hose to a portable, sealed container. With our dust containment systems, there’s very little airborne dust generated to permeate a home during our process.  It’s a healthier environment and cleans up what used to be an extremely dusty process.